Box & Papers:
-
Feed node
Feed node
Movement of each section:
- Each module moves with the help of electricity, is equipped with signaling for the safety of operators;
- Pneumatic blocking device;
- System of starting protection by means of the main drive. If the machine is not ready for work, the current will not be supplied.
Front edge feeding system:
- The vacuum system, the ability to adjust the suction part, ensures fast and smooth feeding of sheets;
- Roller feed mechanism with automatic leveling system, production - Taiwan;
- Electronic adjustment of the side leveler;
- Feed counter.
Dust removal system
Feed shafts:
- The base is a rubberized steel tube, balancing;
- The lower feed shaft is chrome-plated, diameter: 136 mm;
- The gap between the shafts is regulated manually, the range is 1,2~10mm;
-
Slotter
Slotter
Key Features:
- Computer setup.
- Shaft adjustment mechanism.
- Possibility of manual adjustment of positioning.
Double Slotter:
- The width of the knives is 7 mm.
- Knives made of alloy steel, undergo heat treatment.
Device for cutting holes:
- Optionally.
Start and end of work:
- A self-closing mechanism with manual adjustment provides easy and quick access.
- The slotter is equipped with an emergency stop system that ensures operator safety.
-
Cutting unit
Cutting unit
Features:
- Accurate adjustment of the punch-bearing shaft allows you to extend the operational life of rubber parts.
- A device for grinding rubber parts is installed on the machine, which extends the service life of the shaft.
Stamp bearing shaft:
- Ø 360 mm (with rubber lining Ø 408 mm).
- Execution: alloy steel, polished and chrome-plated surface.
- Distances between holes for stamps: 100x55 mm
- The thickness of the base of the stamp: 16 mm (3-layer corrugated cardboard), 13 mm (5-layer corrugated cardboard).
- Equipped with a scrap removal system.
Upper rubberized shaft:
- The base is alloy steel, chrome-plated.
- Thickness of the rubber layer: 10 mm, width: 250 mm.
- Manual adjustment of the clamp.
- Horizontal movement ±40 mm.
- The automatic compensation system allows you to maintain the accuracy of work after grinding the rubber layer.
-
Gears
Gears
The main drive gear:
- High-quality alloy steel.
- Stable operation, low noise level, hardness HRC58~62, long service life, ensures stable printing accuracy.
The connecting ring of the shaft and the reducer ensures smooth and precise operation at a higher torque. Easy installation, easy maintenance.
-
4-color slotter printer with rotary die-cutting section, 2800x480
4-color slotter printer with rotary die-cutting section, 2800x480
Slotter printer with 4 printing sections and rotary die-cutting, size: 480 x 2800 mm
This line is designed for four-color printing, folding, cutting and die-cutting. The line is equipped with a Taiwanese roller feed system with front edge alignment, a frequency-regulated drive, and an adjustable air supply system. The gears are made of high-quality alloy steel.
Basic parameters:
- Max. print size: 1450 x 2500 mm
- Min. sheet size (L x W): 330 mm
- Printing form thickness: 7,2 mm
- Material thickness: 2,5~12 mm
- Max. speed: 150 blanks/min.
- Working speed: 120 blanks/min.
- Printing accuracy: 4-color ± 0,5 mm
- Cutting accuracy: ± 1 mm
- Power of the main drive: 22 kW
Complete set:
To order this equipment, contact info@epikurgroup.com