Box & Papers:
-
Description
Description
Description:
- High stability of work, high level of safety of work, low level of noise.
- The high-strength gripper, the improved gripper device allows you to work with all types of corrugations. The positioning device ensures cutting accuracy.
- The worm gear and the specially developed connecting device of the crankshaft are connected by a bearing sleeve, reduce the movement gap, and help to avoid impacts between the worm and the worm wheel. The function of holding high pressure during cutting. The worm gear is made of wear-resistant aluminum bronze and has a long service life.
- The device of continuous feeding and transportation helps save time and increases efficiency.
- The equipment uses a cam mechanism, a pressure adjustment device, a pneumatic system for blocking the die, and an overload protection device. Foreign high-precision chains, foreign pneumatic couplings are used.
- The leading edge feeding system works in manual-automatic mode, the secondary positioning mechanism allows the use of lower grades of paper.
- The pneumatic die fixing mechanism makes its replacement easier and more convenient, the matrix frame is fixed more firmly, ensuring more accurate work and saving time
- Programmable controller and human-machine interface (HMI). The digital display shows the working speed, the number of workpieces, and the overall working time.
- Display of problems allows to eliminate them faster and easier. Automatic management and control in feeding, cutting and transportation in real time, interact with the barrier in each section. The equipment works more reliably, setting up the machine and troubleshooting is more convenient.
- The high-precision mechanism of intermittent movement ensures high cutting accuracy and stable operation.
- Paper positioning determination system.
- The floating function of the punch makes it easier to install and remove.
- The optoelectronic defect detection system allows to reduce the number of defects.
- The electronic control and control module, with foreign electronic components, ensures accuracy and reliability of work.
- The cyclic oil supply system provides lubrication of moving parts.
- Die-cutting pressure can be adjusted separately at the front and back.
- The oil supply system fixes the time and amount of supply.
- (Optional) 3 waste removal frames, clear design, ease of installation and removal of the waste removal plate.
- (Optional) Automatic waste removal system.
-
AEM-1500S/AEMQ-1500S semi-automatic die-cutting press (with a deburring system)
AEM-1500S/AEMQ-1500S semi-automatic die-cutting press (with a deburring system)
Main characteristics:
1. Max. size: 1500 x 1100 mm
2. min. size: 440 x 470 mm
3. Max. cutting size: 1490 x 1090 mm
4. internal die frame size: 1540 x 1100 mm
5. The size of the die: 1500 x 1100 mm
6. Cutting accuracy: ≤ ± 0,25 mm
7. Max. speed: 4800 blanks/h
8. Foot height: 1400 mm
9. Chalked corrugated cardboard: 0,3-2 mm
10. Corrugated cardboard: 8 mm
11. Power of the main drive: 15 kW
12. Total power: 18,5 kW
13. AEM-1500S size: 6500 (+2000) x2600 (+2200) x 2550 mm
14. Size of AEMQ-1500S: 7770 (+2000) x 2600 (+2200) x 2550 mm
15. Weight of AEM-1500S: 18 tons
16. Weight of AEMQ-1500S: 20 tons
-
The main section
The main section
Description:
- The bearing part is made of QT500 high-strength cast iron, which ensures high strength and no deformation.
- Alloy crankshaft with special treatment.
- Wear-resistant worm, worm gear.
- Cyclic lubrication supply system with a high-pressure oil pump, manufactured in Taiwan.
- High-precision interval mechanism.
- Pneumatic brake device, made in Italy.
- Japanese SMC swivel joint.
- A pneumatic device for fixing a punching die.
- High-strength grip from Ti-Al alloy.
- Accurate pressure regulation device.
- PLC and human-machine interface, manufactured in Taiwan.
- Additional gripper 1 set, die 1 set, die frame 1 set.
-
Waste disposal section
Waste disposal section
Description:
- High-strength frame for waste removal from Ti-Al alloy.
- A lightweight waste removal needle.
- (optional) High-performance pre-installation device.
-
Transportation section
Transportation section
Description:
- An automatic leveling system, 2 blowing devices ensure trouble-free storage of all types of workpieces.
- Transportation section with a control panel, more convenient for the operator.
- Optoelectronic sensor.
- Automatic sheet transportation control system.
- Manual transportation module.
- Main circuit protection device.
- A system for preventing the rollback of workpieces.
-
List of components and parts
List of components and parts
Description:
- Body, main structure, high-strength cast iron QT500-7, China
- Clamping plate, alloy steel 75CR1, China
- Worm, Worm transmission, XINGTANG, China
- Crankshaft material NI-CR-MO (Hastelloy), alloy, China
- Grip, aluminum alloy, China
- Needles of capture, China
- Cam indexing block, HUILIN, China
- Main circuit, TSUBAKI, Japan
- Secondary circuit, KMC, Taiwan
- Pneumatic coupling, OMPI, Italy
- Swivel joint, SMC, Japan
- Pneumatic electromagnetic valve, AIRTAC, Taiwan
- Air volume regulator, AIRTAC, Taiwan
- Feed belt, HABASIT, Sweden
- Cysts, China
- Main drive, TECO, Taiwan
- Main feed drive, CPG, Taiwan
- Conveyor drive, CPG, Taiwan
- Vacuum pump, TONGYOU, China
- Cylinder, AIRTAC, Taiwan
- Oil pump, WLP, Taiwan
- Bearing, FALA, Germany
- Linear guide, HIWIN, Taiwan
- Connector (locker), GEM-YEAR, Taiwan
- Feeder, China
- Electromagnetic cam coupling, SHANGHAI, China
- Converter (converter), FRECON, CHINA
- Human-Machine Interface, TAISEE, Taiwan
- Sensor, PANASONIC, Japan
- PLC controller, FATEK, Taiwan
- Encoder, NEMICON, Japan
- Oil pressure switch, AIRTAC, Taiwan
- Contactless switch, Fotek, Taiwan
- Relay, SCHNEIDER, France
- Optoelectronic switch, PANASONIC, Japan
- Signal lamp, China
- Cable, DELIXI, China
- Button, SCHNEIDER, France
- Pressure control system, SANKAI, China
- AC contactor, SCHNEIDER, France
- Automatic switch, SCHNEIDER, France
- Terminal, TIANDE, China
To order this equipment, contact info@epikurgroup.com