Box & Papers:
-
Feed node
Feed node
Movement of each section:
- Each module moves with the help of electricity, is equipped with signaling for the safety of operators;
- Pneumatic blocking device;
- System of starting protection by means of the main drive. If the machine is not ready for work, the current will not be supplied.
Front edge feeding system:
- The vacuum system, the ability to adjust the suction part, ensures fast and smooth feeding of sheets;
- Roller feed mechanism with automatic leveling system, production - Taiwan;
- Electronic adjustment of the side leveler;
- Feed counter.
Dust removal system
Feed shafts:
- The base is a rubberized steel tube, balancing;
- The lower feed shaft is chrome-plated, diameter: 136 mm;
- The gap between the shafts is regulated manually, the range is 1,2~10mm;
-
Print node
Print node
Printing shaft:
- Outer diameter Ø 480 mm;
- Execution: steel, grinding, chrome plating;
- Foot switch for clockwise and counterclockwise operation mode;
- Balancing, stable work.
Pinch shaft:
- Outer thickness 18 mm;
- Execution: steel, grinding, chrome plating;
- Balancing, stable work;
- Manual adjustment, range 1,2~10 mm.
Upper and lower feed shafts:
- Upper shaft: seamless steel tube, has 2 paper feed wheels;
- Bottom shaft: seamlessth steelth pipesа, polishing, chrome coating;
- Manual adjustment, range 1,2~10 mm.
Steel raster shaft (ceramic optional):
- Outer thickness 18 mm;
- Execution: steel, grinding, chrome plating;
- Balancing, stable work;
- Shaft cells in accordance with the customer's requirements: the number of cells of the 1st group is 220, 2nd, 3rd, 4th groups - 240;
- Pneumatic automatic shaft lifting system (when stopped, the shaft rises);
- The design makes it easier and faster to wash the shaft.
Rubber shaft:
- Steel base;
- Balancing, stable work.
Setting system:
- Planetary transmission system;
- Electronic digital adjustment of printing parameters, control system (both during operation and when stopped);
- Manual horizontal adjustment, ±7,5 mm.
Paint circulation:
- Pneumatic paint supply pump, stable operation;
- The filter, removal system is dirty.
Pneumatic brake
-
Slotter
Slotter
Key Features:
- Computer setup.
- Shaft adjustment mechanism.
- Possibility of manual adjustment of positioning.
Double Slotter:
- The width of the knives is 7 mm.
- Knives made of alloy steel, undergo heat treatment.
Device for cutting holes:
- Optionally.
Start and end of work:
- A self-closing mechanism with manual adjustment provides easy and quick access.
- The slotter is equipped with an emergency stop system that ensures operator safety.
-
Cutting unit
Cutting unit
Features:
- Accurate adjustment of the punch-bearing shaft allows you to extend the operational life of rubber parts.
- A device for grinding rubber parts is installed on the machine, which extends the service life of the shaft.
Stamp bearing shaft:
- Ø 360 mm (with rubber lining Ø 408 mm).
- Execution: alloy steel, polished and chrome-plated surface.
- Distances between holes for stamps: 100x55 mm
- The thickness of the base of the stamp: 16 mm (3-layer corrugated cardboard), 13 mm (5-layer corrugated cardboard).
- Equipped with a scrap removal system.
Upper rubberized shaft:
- The base is alloy steel, chrome-plated.
- Thickness of the rubber layer: 10 mm, width: 250 mm.
- Manual adjustment of the clamp.
- Horizontal movement ±40 mm.
- The automatic compensation system allows you to maintain the accuracy of work after grinding the rubber layer.
-
4-color slotter printer with rotary die-cutting section, 2800x480
4-color slotter printer with rotary die-cutting section, 2800x480
Slotter printer with 4 printing sections and rotary die-cutting, size: 480 x 2800 mm
This line is designed for four-color printing, folding, cutting and die-cutting. The line is equipped with a Taiwanese roller feed system with front edge alignment, a frequency-regulated drive, and an adjustable air supply system. The gears are made of high-quality alloy steel.
Basic parameters:
- Max. print size: 1450 x 2500 mm
- Min. sheet size (L x W): 330 mm
- Printing form thickness: 7,2 mm
- Material thickness: 2,5~12 mm
- Max. speed: 150 blanks/min.
- Working speed: 120 blanks/min.
- Printing accuracy: 4-color ± 0,5 mm
- Cutting accuracy: ± 1 mm
- Power of the main drive: 22 kW
Complete set:
To order this equipment, contact info@epikurgroup.com