Box & Papers:
-
Feed section
Feed section
Description:
- Auto-questioner.
- Manual feeding mechanism.
- Manual/automatic modes.
- Side leveling stop on both sides.
- Precise adjustment of the feeding device, without interrupting work.
- Double electronic detector.
- Wear-resistant polyurethane feed wheel.
- The adjustable rubber wheel and the brush wheel ensure that the paper is fed in the correct position.
- The front stop detector ensures that the paper is fed in the correct position.
- Double-sided stop ensures printing accuracy.
-
AEM-1500S/AEMQ-1500S semi-automatic die-cutting press (with a deburring system)
AEM-1500S/AEMQ-1500S semi-automatic die-cutting press (with a deburring system)
Main characteristics:
1. Max. size: 1500 x 1100 mm
2. min. size: 440 x 470 mm
3. Max. cutting size: 1490 x 1090 mm
4. internal die frame size: 1540 x 1100 mm
5. The size of the die: 1500 x 1100 mm
6. Cutting accuracy: ≤ ± 0,25 mm
7. Max. speed: 4800 blanks/h
8. Foot height: 1400 mm
9. Chalked corrugated cardboard: 0,3-2 mm
10. Corrugated cardboard: 8 mm
11. Power of the main drive: 15 kW
12. Total power: 18,5 kW
13. AEM-1500S size: 6500 (+2000) x2600 (+2200) x 2550 mm
14. Size of AEMQ-1500S: 7770 (+2000) x 2600 (+2200) x 2550 mm
15. Weight of AEM-1500S: 18 tons
16. Weight of AEMQ-1500S: 20 tons
-
The main section
The main section
Description:
- The bearing part is made of QT500 high-strength cast iron, which ensures high strength and no deformation.
- Alloy crankshaft with special treatment.
- Wear-resistant worm, worm gear.
- Cyclic lubrication supply system with a high-pressure oil pump, manufactured in Taiwan.
- High-precision interval mechanism.
- Pneumatic brake device, made in Italy.
- Japanese SMC swivel joint.
- A pneumatic device for fixing a punching die.
- High-strength grip from Ti-Al alloy.
- Accurate pressure regulation device.
- PLC and human-machine interface, manufactured in Taiwan.
- Additional gripper 1 set, die 1 set, die frame 1 set.
-
Waste disposal section
Waste disposal section
Description:
- High-strength frame for waste removal from Ti-Al alloy.
- A lightweight waste removal needle.
- (optional) High-performance pre-installation device.
-
Transportation section
Transportation section
Description:
- An automatic leveling system, 2 blowing devices ensure trouble-free storage of all types of workpieces.
- Transportation section with a control panel, more convenient for the operator.
- Optoelectronic sensor.
- Automatic sheet transportation control system.
- Manual transportation module.
- Main circuit protection device.
- A system for preventing the rollback of workpieces.
-
List of components and parts
List of components and parts
Description:
- Body, main structure, high-strength cast iron QT500-7, China
- Clamping plate, alloy steel 75CR1, China
- Worm, Worm transmission, XINGTANG, China
- Crankshaft material NI-CR-MO (Hastelloy), alloy, China
- Grip, aluminum alloy, China
- Needles of capture, China
- Cam indexing block, HUILIN, China
- Main circuit, TSUBAKI, Japan
- Secondary circuit, KMC, Taiwan
- Pneumatic coupling, OMPI, Italy
- Swivel joint, SMC, Japan
- Pneumatic electromagnetic valve, AIRTAC, Taiwan
- Air volume regulator, AIRTAC, Taiwan
- Feed belt, HABASIT, Sweden
- Cysts, China
- Main drive, TECO, Taiwan
- Main feed drive, CPG, Taiwan
- Conveyor drive, CPG, Taiwan
- Vacuum pump, TONGYOU, China
- Cylinder, AIRTAC, Taiwan
- Oil pump, WLP, Taiwan
- Bearing, FALA, Germany
- Linear guide, HIWIN, Taiwan
- Connector (locker), GEM-YEAR, Taiwan
- Feeder, China
- Electromagnetic cam coupling, SHANGHAI, China
- Converter (converter), FRECON, CHINA
- Human-Machine Interface, TAISEE, Taiwan
- Sensor, PANASONIC, Japan
- PLC controller, FATEK, Taiwan
- Encoder, NEMICON, Japan
- Oil pressure switch, AIRTAC, Taiwan
- Contactless switch, Fotek, Taiwan
- Relay, SCHNEIDER, France
- Optoelectronic switch, PANASONIC, Japan
- Signal lamp, China
- Cable, DELIXI, China
- Button, SCHNEIDER, France
- Pressure control system, SANKAI, China
- AC contactor, SCHNEIDER, France
- Automatic switch, SCHNEIDER, France
- Terminal, TIANDE, China
To order this equipment, contact info@epikurgroup.com